Seymour Duncan

Guitar Pickup Booster Pedal, Red

Model: 11900-003
UPC: 800315039852
Please log in to see your price
Dealer locator
The Pickup Booster is designed to boost your signal without altering the character of your guitar, while also hiding a few tone-shaping tricks up its sleeve.

Type of circuitry: Fully discrete, Class A

Gain range: 0 to 25 dB

Bypass: True bypass

Pickup Resonance Switch: Makes a single coil pickup sound like a vintage humbucker (“1”) or

high output humbucker (“2”).

Frequency Response: -3dB at 30Hz and 38 kHz

Distortion: < 0.02% at 200mV RMS output

Noise: -120 dBV (referred to input with gain set at 25dB)

Input impedance: 250K Ohms (when effect is “on”)

Output impedance: 150 Ohms

Power: 9V battery or external 9 to 18V Regulated DC Adapter (center negative)

Current consumption: 4.5mA @ 9V (when LED is “on”), 3mA @ 9V (when LED is “off”).

Currents at 18V are 11mA and 8mA, respectively.

Dimensions: 2.61” X 4.90” X 1.45”

Weight: 0.8lb. without battery

more
About This Product

Description:

The Pickup Booster is for when you love the sound of your guitar but you need a little more: more output, more gain or just a little more control over your guitar’s voice without changing its fundamental character. Think of it as sending your guitar to the gym. A true-bypass pedal with a class A, low-noise circuit design, Pickup Booster can be used to dial in the tone you need for every situation. It will emphasize your guitar’s natural tone while adding some muscle and fatness. It uses a discrete push-pull output stage for increased drive capability, so even with the Gain knob down to 0dB your signal chain will sound cleaner – even with long cable runs – essentially acting as a buffer on your pedalboard. Need a humbucker sound out of that vintage Strat? The Resonance Switch makes the pedal interact directly with your pickups, allowing your single coils to emulate either a chunky humbucker sound perfect for classic rock or blues or a high-output tone for rip-roaring solos. If you’re using humbuckers, Position 1 will give your guitar a little more ‘teeth,’ while Position 2 gives you a hint of that ‘cocked-wah’ tone filter vibe which is great for leads. Like all of our pedals, Pickup Booster is designed and assembled at our Santa Barbara, California factory by the same team responsible for our legendary pickups.
Specifications
  • Division
  • Erikson Music
  • Effects Type
  • Pedal
Sponsored products
Related products
Customers who bought this product also purchased
Brand:Vox
Model: AP3BA
Please log in to see your price
Retail Price: $93.00
Brand:Vox
Model: PATHFINDER10
Please log in to see your price
Retail Price: $230.00
Brand:Vox
Model: V847A
Please log in to see your price
Retail Price: $265.00
Brand:Vater Percussion
Model: VBUZZXD
Please log in to see your price
Retail Price: $24.95
Brand:Vater Percussion
Model: VH5BN
Please log in to see your price
Retail Price: $26.60
Brand:Vater Percussion
Model: VH5AW
Please log in to see your price
Retail Price: $25.30
Brand:Vater Percussion
Model: VHSCSTD
Please log in to see your price
Retail Price: $27.50
Brand:Seymour Duncan
Model: 11106-32B
Please log in to see your price
Retail Price: $416.00
Brand:Seymour Duncan
Model: 11500-30
Please log in to see your price
Retail Price: $129.00
Brand:Quik Lok
Model: LPH-X
Please log in to see your price
Retail Price: $230.00